Lift mechanism
SERVO-DRIVE for AVENTOS requires a lift mechanism with an elongated hole on the left side. This is required for attaching the drive unit.
Cover cap
It covers the lift mechanism as well as the drive unit and distribution cable on the left side and can be extended up to an internal depth of 350 mm if required.
Fixing positions
Attention: The fixing positions have changed because the drive unit is attached to the lift mechanism. Markings on the lift mechanism indicate the new fixing positions.
Cross stabiliser
Attention: The length of the cross stabiliser as well as the material of the bracket have changed for AVENTOS HS (up & over lift system) and HL (lift up).
Drilling
The drilling for the distribution cable is only required on the left side.
Drilling for the switch
The SERVO-DRIVE switch requires a 3/4 drilling on the bottom cabinet side.
Blum distance bumper
It ensures the required trigger path of 2 mm. The require holes must be drilled into the front. The distance bumper must not be glued.
Start-up
SERVO-DRIVE for AVENTOS is easy to set up and operate thanks to the clearly defined function keys.
