SERVO-DRIVE for AVENTOS

Here are several of the most frequently asked questions for our products. If you cannot find the answer you are looking for, please do not hesitate to contact us. We look forward to hearing from you.

How is this different from the regular AVENTOS lift mechanism?

For the SERVO-DRIVE-compatible version, the lift mechanism has an elongated hole in which the drive unit can be inserted or clipped on during assembly.

Can I retrofit SERVO-DRIVE for AVENTOS?

Yes, you do require additional components depending on the lift system type:

• • SERVO-DRIVE-compatible lift mechanism
• • Special cover cap left (adjustable)
• • SERVO-DRIVE bumpers Switches Transformer & cabling

Additional for AVENTOS HS and HL:

• • Special lever arms
• • Shorter cross stabiliser rod
• • Modified cross stabiliser adapter

Do I need different drive units for different lift system types?

No. You can use the same drive unit for the following AVENTOS lift systems: bi-fold lift system, up & over lift system and lift up.

Can I synchronise drive units?

Yes. Up to three drive units can be set so that they move simultaneously.

Can I use asymmetrical fronts or fronts with aluminium frames?

Yes, this is possible, although there are certain restrictions

Can SERVO-DRIVE for AVENTOS also be used with lift systems with handles?

Yes. You can use SERVO-DRIVE for AVENTOS with lift systems with or without handles. The handle is purely a design element in this case. Pulling the handle does not trigger the motion support system because SERVO-DRIVE for AVENTOS is only activated by a light touch on the front. In any case, the lift system can be opened manually at any time.

Can I attached an opening angle stop?

Yes, this is possible - however only after drive unit installation and before start-up.

Where are the SERVO-DRIVE switches located?

The SERVO-DRIVE switches is attached to the cabinet sides near the bottom. This makes it easy to reach for the kitchen user. This position also ensures that SERVO-DRIVE for AVENTOS functions optimally.

What does my customer see when the battery has to be replaced?

The SERVO-DRIVE switch contains a battery display. It flashes red when the battery needs to be replaced. Battery replacement is very simple. All you need is a common button cell battery (type CR 2032).

What happens when the power goes off?

When the power goes off, SERVO-DRIVE for AVENTOS cannot be activated. However, you can continue to open and close manually. Once the power has been restored, SERVO-DRIVE for AVENTOS is again functional – no re-setting required.
If the power should go out while the lift system is in motion, it remains in place. Once the power has been restored, simply touch the SERVO-DRIVE switch to reactivate SERVO-DRIVE for AVENTOS.

Can SERVO-DRIVE for AVENTOS be deactivated?

Your customers can easily deactivate SERVO-DRIVE for AVENTOS, e.g. to clean the fronts. We recommend a switched outlet for this. While deactivated, the lift systems can continue to be opened and closed manually.

What if there is a warranty claim?

SERVO-DRIVE for AVENTOS underwent exhaustive testing in the Blum test lab: opening and closing 80,000 times. When you combine SERVO-DRIVE for AVENTOS with AVENTOS lift systems, you will profit from a five-year warranty for all electrical components. In case of a warranty claim, please contact your hardware distributor.